1. Inicio
  2. Nuestros Productos

CASA DE VIGAS

Venus es uno de los pocos fabricantes que ofrece una gama completa de soluciones necesarias en la Industria del cuero. Se ofrecen los siguientes productos químicos para cuero de BEAM HOUSE. Para productos relacionados, consulte sintantes líquidos, fatlicores y fijadores de tinte.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Bactericide para short term preservation of fresh hides y skins during soaking Apariencia: Greenish yellow clear liquid, pH: 10 ±1, Specific gravity: 1.16-1.19 Active Ingredient: Sodium salt of dimethyl dithio carbamate, % Active content: Min. 40 %, Solubility in agua: Freely soluble It is compatible con all soaking y unhairing agentes.It is rapidly absorbed by the hide surface.It has low odour y low toxicity. Fresh Hide preservation : Hide should be washed to remove dirt, dung & blood priorto application of Venpreserve.100% agua 0.3% Ven preserve (on fresh hide weight)Preservation para 3 days can be achieved by running para 1 hour followed by runningpara 1 minute every 2 hrs.(para longer preservation, 0.1% Venpreserve should be added para each day, i.e., para preservation para 5 days - 0.5% Venpreserve should be used at the beginning.)Maximum preservation of 7 days is possible using Venpreserve.The hides can also be sprayed con 8-10 gpl of Venpreserve soln, in agua.para bovine hides, 1-2 liters of this soln, of Venpreserve is required to be sprayed.para Soaking : 0.05 - 0.1% Venpreserve is required para short soak of 4 - 6 hrs. (qty. a base de on fresh hide weight)0.1-0.2% Venpreserve is required para overnight soak. para dried stock the dosage of Venpreserve would be higher. El Productoo es eestable para 6 months if stored in dry & cool place in closed container under normal conditions.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Com pact Soaking agente para enhanced effect. Apariencia: Off-white powder pH:ll±l Being a multifunctional product for soaking system, it helps maintain uniformity of soaking from lotto lot.It has self pH regulating propiedades, it maintains bath pH between 9.0 - 9.5 throughout the soaking process to yield even soaking effect. Its use leads to stabilization of belly and flanks to mechanical actions in soaking and liming, resulting in fuller and tighter shanks and bellies, without affecting skin fibers.With its use in soaking, process is easy to monitor and control due to the unique self pH regulating property of the product. It is used in main soaking process (after presoaking i.e., dirt, dung, blood, salt fully removed)para cow hides 0.75 - 2.0% (a base de on wet salted raw wt.)para calves 0.5 -1.0% (a base de on wet salted raw wt.) paragoaty sheep skins 0.5 -1.0% (a base de on wet salted raw wt.) Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Amphoteric emulsificante cum dispersing agent Apariencia: Reddish yellow to yellowish brown, viscous, pourable liquid, pH(10%soln.):8±0.5, Solid content: 50 ±2% Dilutability: Dilutable con hot agua in any proportion. Constant stirring is required while mixing con hot agua. Stability: estable to acid, alkali, salt, hard agua y chrome. It disperses natural fats y facilitates even distribution of chrome y fats through entire cross section of leather.It increases softness of leather y promotes level Teñido.When used in semi chrome tannage, it helps to avoid drawn grain. It can be used in the pickle or chrome tannage. In the pickling it helps in dispersing natural fats y accelerates pickling process. In chrome tannage it helps in dispersion of chrome tanningsalts. Dosage: 0.5-1% on shaved weight.It can be used together con agentee de retannings or fatliquors in any preliminary fatliquoring process. Dosage: 0.5-1% on shaved weight.It is used in main fatliquoring process to stabilize fatliquor mixtures. The use of this Producto offers improvement in penetration y uniparam distribution of fatliquor.Dosage :l-5% on amount of fatliquor. It helps in accelerating uniparam wetting back of leather y produces levelling effect on the subsequent Teñido. It's best use is in semichrome tannage to disperse the natural fats applied during vegetable tannage. It thereby prevents the paramation of chrome soap. It also helps in producingfinegrain y minimizes drawn grain effect.Dosage: 1 -5% on dry weight ofE.I. leather. Product is stable for 6 months from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Highly efficient detergent, washing and agente humectante for use in soaking, batingand wetting back process. Apariencia: Clear, colourless liquid Chemical Character: Non-ionic, modified polyglycol ether.Dilutability: Freely dilutable con agua.Solid content: 25 ± 1% estable to: Acid (good in weak Acids) alkali, hard agua & salt.pH (10% soln.): 7.5 ± 0.5 It is an excelente fat stabilizing cum wet-blue cleaning agente. It has powerful dispersing effect on the scud y natural fats.When used in main fatliquoring, it improves dispersion of fat very effectively. Also the undesirable precipitation of fatliquor is avoided by its usage. This leads to improvement in overall softness.It also improves tensile strength of leather when used in pickling beparae addition of acid.Its usage improves the wetting back of dried wet-blue considerably.It speeds up the soaking process con an appreciable increase in cleanliness of the skins.Its usage does not impairthe action of enzyme bates. It can be used in various stages of processing like soaking, liming, pickling, degreasing, wetting backy fatliquoring. In soakingy liming: 0.5 - 3% (on wet sa Ited raw wt.)In the bate: 0.2-2% (on peltwt.)Wetting back: 0.5 -1.0% para wetting back of shaved wet-blue hides & skins. 1.0-3.0% para dried wet-blue (on dried wt.) Minimum 06 months if stored in dry & cool place in closed container under normal conditions.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Efficient degreasing agente para use in pelt, E.I. tanned y wet blue stages Appearance: Colourless to pale yellow viscous liquid, Solubility :Dilutable with water. Solutions above lOOg per liter are slightly turbid.Ionic Character: Crypto-anionic, based on Alcohol graso polyglycolic ether Stable to: Acid (good in weak Acids) alkali, hard water & salt. pH (10% soln.): 7.5 ± 0.5 Solid Content: min. 33% It is specially suitable para degreasing sheep skins (removes unwanted fat from hides y skins)It can disperse chrome soaps y degrease wet blue skins to get level Teñido para aniline leathers, make nubuck, split suede, full grain leather conout dye patches. It helps in minimizing back bone patches in suede Teñidos. Pelt after bating to be dry milled con 3-4% of this Producto diluted con 5-10% agua, para an hour. To be washed once or twice con luke warm agua in fleshing machine y then to betaken up para pickling as usual. para degreasing of pickled sheep skins, to be dry milled as below, aguaat35°C : 10% (on pickled wt.)Salt : 1.5% (on pickled wt.)VendigrisWP : 4.5% (on pickled wt.)After dry milling para 1 hour, wash the skins once or twice in fleshing machine con lukewarm 5% brine solution y take parafurther processing. para degreasing of wet blue skins, shaved skins are drummed para 1 hour as below,aguaat35°C : 35-50% (on shaved wt.) VendigrisWP : 4-5% (on shaved wt.)Skins are then washed con 300% agua at 60°C para 20 minutes y taken para further process.para minimizing back bone patches in suede Teñido, the crust is wetted back as below.agua at 60°C : 300% (on dry wt.)VendigrisWP : 3-4% (on dry wt.)Ammonia : 2%{ondrywt.)After 2 hours of drumming when the leathers are properly wet, drain the float, wash con 500% agua at 60°Cpara 15 minutes y take para Teñido. Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO NATURALEZA QUÍMICA CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
High perparamance eco-friendly degreasing, soaking, liming y deliming agente. Very effective degreasing agente para all types of leathers & fur skins. Universal in application as can be used in all stages of leather y fur processing. Alcohol graso Alkoxylate Apariencia: Colourless, clear to slightly hazy liquid % Active content: Ca. 100 Solubility: Miscible con agua in all proportions pH of 10% solution: Ca. 7 Ionic Nature: Non-ionic Free of APEO y free of solvent. Best degreasing and good soaking effect throughout butt and flank area baja espuma Offers uniform and bright dyeing performance Its performance is unaffected by pH. It shows high emulsion stability at any pH Low viscosity Extremely low dosage required Facilitates waterproofing fácilmente biodegradable & very much eco-friendly due to its low dosage Its special areas of application are: ( % a base de on skin & hides condition )♦ Degreasing.♦ Soaking & liming♦ Wetting back ♦ Washingof fur skins. Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Liming agente para use in the unhairing stage Apariencia: Colourless to yellowish liquid Density @ 25°C: 1.02 -1.06 g/cc, pH:ll±l(Drop in pH is normal over prolonged storage. However this will not affect Producto perparamance in any which way) It accelerates dissolution of lime y thereparae penetration is improved. Swelling y plumping is more uniparam y there is no growth mark on hides.Its usage minimizes wrinkle development in the pelt which helps in achieving flat grain. Due to flat grain pelt yield area increases. It is used in the beginning y also used partially at the end of liming process. Initially after adding it, run para 30-40 minutes followed by addition of sulfide y lime system.para bovine hides: 1-2% is recommended para Calfskins (direct liming): 0.75% -1.75% in the beginning y 0.25% at the end para Skins : 1-1.5% para direct liming, : 0.5-1% inthe paste para paint method, : 0.5-l%inthe drum. Product is stable for 6 months from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
sal de amonios free de-liming agent Apariencia: White powder, pH (1% solution): 2±1 t is free of sal de amonios and nitrogen based products. Being completely free from any nitrogenous product, it will not increase any effluent load on discharge from tannery. Very effective de-liming agent for all types of hides and skins It gives very compact pelt which facilitates production of high quality wet blue.Wet blues produced have almost no wrinkles and are fuller with tighter bellies and no shanks. De-liming with this product produces pelts with uniform and bright colours. This product is to be added after the pre-wash at the beginning of de-liming to ensure near complete de-liming for skins and splits. It can be used in both pre-de-liming and main de-liming stages. The float has to be lesser in comparison to onventional sal de amonios based products for speedier penetration of this product in to the pelts to ensure effective and complete de-liming.It can also be used in pickling to mask chrome salts for better exhaustion of chrome bath.For cow hides: 2.0-3.0% (based on un-split limed pelt wt.)1.0- 2.5% (based on limed split pelt wt.)Thorough washing before de-liming is essential. 20% of total dosage in pre-de-lime for 20-30 minutes followed by drain and addition of rest of the dosage helps achieve faster and complete de-liming.For skins and calves: Skins: 0.5-1.25% (on pelt wt.)Calves: 0.5-1.5% (on pelt wt.)In plckllng:0.5-1.0% for exhaustion of chrome intheliquorthru masking. Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

Productos y Páginas Relacionados

Productos Relacionados

Químicos para Cuero
Sintanes líquidos
Fatliquors
Fijadores de tinte

Preguntas Frecuentes

Encuentre respuestas a preguntas comunes sobre nuestros productos y servicios

Venus Ethoxyethers fabrica y suministra productos químicos para cuero en India: sintanes (líquidos y en polvo), fatliquors, fijadores de tinte, productos para beam house y acabado. Solicite una cotización.

El procesamiento del cuero utiliza productos químicos para beam house, sintanes, fatliquors, fijadores de tinte y acabado. Venus suministra una gama completa desde el curtido en bruto hasta el cuero acabado.

Los sintanes son agentes curtientes sintéticos que mejoran la plenitud, suavidad y receptividad al tinte del cuero. Ofrecemos sintanes líquidos y en polvo que mejoran la calidad y las propiedades del cuero acabado.

Los fatliquors aportan suavidad, flexibilidad y durabilidad al cuero. Lubrican las fibras, previenen la fragilidad y mantienen el cuero flexible y confortable.

Sí, ofrecemos productos químicos para cuero que cumplen estándares internacionales, desarrollados con enfoque en reducir el impacto ambiental manteniendo alto rendimiento.

No se encontraron preguntas

Intente ajustar los términos de búsqueda