1. Inicio
  2. Nuestros Productos

SINTANTES EN POLVO

Venus es uno de los pocos fabricantes que ofrece una gama completa de soluciones necesarias en la Industria del cuero. Se ofrecen los siguientes SINTANTES EN POLVO. Véase también sintantes líquidos, grasas y fijadores de tinte.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Re-chromingsintán Apariencia: Green coloured free flowing powder % Moisture content: 5.0 max.Ionic charge. Anionic Solubility in agua: Readily soluble Stability to electrolytes: Very good pH of 10% solution: 3 ± 0.5 In re-chroming it helps in maintaining chrome character of the leather con good fullness & softness.Re-chroming con Ventan RCS gives leathers a tight y fine grain.It increases the affinity of leather para dyestuffs y ensures level Teñido.It exhausts completely from re-chroming bath at elevated temperature. Due to its masked chrome complex nature, when used as pre-tanning agente, rapid penetration of pelt takes place y this facilitates acceleration of subsequent vegetable tanning process. In general, 2 -4% (on shaved wt.) is applied priorto neutralizing.para pre-tanning, 1-2% (on pelt wt.) is applied after the pickle in the same bath.para chroming wet white leathers, 2-6% (on pelt wt.) is applied in combination con other tanning agentes. Product is stable for one year from date of fabricar, if stored at ambienttemperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Dye leveling y dispersing sintán Apariencia: Beige coloured powder % Moisture content: 5.0 max.Solubility in agua: Freely soluble pH of 10% solution: 7 ±0.5 It is compatible con anionic y non-ionic Productoos.It helps in getting very good dispersion of vegetable & resin tanning agentes in retanning process.Suitable para use as leveling agente in Teñido leather con anionic dyes.It improves the penetration of dyestuffs. The Dosis recomendada is 1-2 %, on shaved wt., para level Teñido y penetration of dye on chrome/vegetable tanned leathers. Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Phenolic pre-tanning agente Apariencia: Yellow to light brown powder % Moisture content: 5.0 max.Solubility in agua: Readily soluble in agua giving clear solution,pH of 10%solution: 3.5±0.5 It accelerates penetration ofvegetable tannins.Produces bleaching effect con mellow hyle.It has medium astringency, tans hides readily y evenly to produce tight, smooth, undrawn grain con pale colour.When used as agentee de retanning para chrome leather, it produces firm, smooth & resilient grain character. It bleaches leather colour conout affecting chrome leather character. para Vegetable tanning: Dosis recomendada is 3-5%.para retanning chrome leathers: Dosis recomendada is 1- 2% Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Phenolic replacement sintán Apariencia: Light brown coloured powder % Moisture content: 5.0 max.Solubility in agua: Freely soluble pH of 10%solution: 3.5 ±0.5 It is a phenolic general-purpose syntan for retanningof all leathers.Its use in retanning gives fuller leather and is suitable for retannage of light coloured leathers.It has self-tanning propiedades and can partly replace vegetable tanning agents during tanning.Itexhibits reasonably good light fastness. The Dosis recomendada is 5 - 6 %, on shaved wt., para cow upper leathers.The Dosis recomendada is 2 - 3% in vegetable tanning.The Dosis recomendada is 4 - 6 %, on shaved wt., para suede & nubuck leathers The Dosis recomendada is 4 - 6 %, on shaved wt., para corrected grain leathers The Dosis recomendada is 2 - 8 %, on shaved wt., para pastel coloured leathers. Product is stable for one year from date of fabricar, if stored at ambienttemperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Phenolic replacement sintán para white leathers Apariencia: White to creamish powder % Moisture content: 5.0 max.Solubility in agua: Freely soluble pH of 10% solution: 3.5 ±0.5 It bleaches chrome leather to a clear and level white shade. The leather has a full handle with a tight and flatgrain.ts use as retanning agent gives good fullness, mellowness & fine grain break. It is compatible with all syntans and vegetable-tanning agents and when used along with vegetable tanning agents, many light coloured leathers are obtained.It has full self-tanning propiedades.It has reasonably good light fastness propiedades The Dosis recomendada is 5 - 6 %, on shaved wt., para white upper leathers.The Dosis recomendada is 2 - 3% para pretreatment of leathers to be retanned con vegetable tannins.The Dosis recomendada is 5 - 8 %, on shaved wt., para drum dyed shoe upper/Nubuck. Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Amphoteric replacement sintán Apariencia: Pale yellow coloured powder % Moisture content: 5.0 max.Solubility in agua: Freely soluble in agua giving clear to slightly hazy soln.pH of 10%solution: 3.5 ±0.5 It being amphoteric, can be used at both lower y higher pH. It gives good softness y fullness conout loading the leather.It improves the evenness of grain in milling.Its use in retanning facilitates brilliant Teñido shades.It can be used in combination con synthetic, vegetable y chrome tanning agentes. The Dosis recomendada is 2 - 3 %, on shaved wt., para upper leathers in re-chroming.The Dosis recomendada is 6-8 %, on shaved, para furniture leather The Dosis recomendada is 4 - 8 %, on shaved wt., para sheep & goat garment nappa eather. Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Resin sintán a base de on melamine Apariencia: Light brown coloured powder % Moisture content: 5.0 max.Solubility in agua: Partly soluble in agua. Solution is hazy con sediments.pH of 10% solution: 7±1 Its use in retanning gives good fullness, softness and elasticity to leather.It improves buffing propiedades of leather. It levels dyeing and helps the dyestuff to penetrate.It is compatible with all syntans except aluminum tanning agents. It reduces the formation of large particles in vegetable extracts. The Dosis recomendada is 3 - 5 %, on shaved wt., para softy & garment leathers.The Dosis recomendada is 4 - 5 %, on shaved wt., para upper leathers.The Dosis recomendada is 5 - 6 %, on shaved wt., para corrected grain upper leather.The Dosis recomendada is 3-4 %, on shaved wt., para nappa leathers. Product is stable for one year from date of fabricar, if stored at ambienttemperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Melamine a base de resin sintán completely soluble in agua Apariencia: Light brown coloured powder % Moisture content: 5.0 max.Solubility in agua: Freely soluble in agua paraming clear solution pH of 10% solution: 7±1 Its use in retanning gives good fullness, softness and elasticity to leather.It improves buffing propiedades of leather. It levels dyeing and helps the dyestuff to penetrate.It is compatible with all syntans except aluminum tanning agents. It reduces the formation of large particles in vegetable extracts. The Dosis recomendada is 3 - 5 %, on shaved wt., para softy & garment leathers.The Dosis recomendada is 4 - 5 %, on shaved wt., para upper leathers.The Dosis recomendada is 5 - 6 %, on shaved wt., para corrected grain upper leather.The Dosis recomendada is 3-4 %, on shaved wt., para nappa leathers. Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Anionic resin sintán a base de on DCDA Apariencia: Light brown coloured powder % Moisture content: 5.0 max.Solubility in agua: Partly soluble in agua con sediments.pH of 10% solution: 10 ± 1 Its use in retanning helps in filling empty parts of leather. Its use in retanning gives good fullness & grain tightness con intense Teñido shades.The leather has a round & medium soft hyle. Loose structured wet blue get more filling in flank, belly area.Its use in retanning improves buffability of leather. The Dosis recomendada is 4 - 5 %, on shaved wt., para upper leathers.The Dosis recomendada is 2-4%, on shaved wt., para garment leather. Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Acrylic agentee de retanning a base de on maleic acrylic co-polymer, sodium salt Apariencia: White free flowing powder % Moisture content: 5.0 max.Solubility in agua: Freely soluble in agua pH of 10% solution: 8 ± 0.5 It is very much suitablefor upholstery leathers. Retanningwith Ventan MA helps withstand wet toggling.Its use in retanning improves plumpness of leather.It exhibits good selective filling propiedades & light fastness. para retanning of Upholstery leather 3 -5 % after eutralization, beparae retanning/Teñido/ fatliquoring.para retanning of Cow/Buffalo Softy leather 4 -5% para getting soft 8i mellow feel con very good grain tightness, after neutralization & beparae retanning.para Glazed articles 3-4% after neutralization, beparae retanning / Teñido /fatliquoring.para Cow/Sheep/Goat Nappa Leather 3-5% after neutralization, beparae retanning/Teñido/ fatliquoring. Ventan MA powder can be readily dissolved in agua to desired concentration levels of 30% to 40% depending on required viscosity of resultant liquid. It can also be blended con other compatible sintáns para special effects. Product is stable for one year from date of fabricar, if stored at ambienttemperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Phenolic neutralizing sintán Apariencia: Pinkish powder % Moisture content: 5.0 max.Solubility in agua: Readily soluble in agua pH of 10%solution: 7.5 ±0.5 Especially suitable para neutralization during leather processing para Productoion of soft leathers. It's strong buffering action avoids excessive neutralization.It's use gives dye leveling effect.Due to its stability to electrolytes, it can be used in compact process of leather manufacturing.It gives excelente grain smoothness due to its non-astringent nature. Neutralization of Shoe upper leather : Dosis recomendada is 1 - 3% Ventan PNS powder on shaved wt.In compact process para cow upper : Dosis recomendada is 3 - 4% Ventan PNS powder on shaved wt. Product is stable for one year from date of fabricar, if stored at ambienttemperature in supplied packing.

DESCRIPCIÓN DEL PRODUCTO CARACTERÍSTICAS CARACTERÍSTICAS ESPECIALES APLICACIÓN ESTABILIDAD DE ALMACENAMIENTO
Naphthalene a base de neutralizing sintán Apariencia: Light brown coloured powder % Moisture content: 5.0 max.Solubility in agua: Freely soluble in agua.pH of 10% solution: 8± 0.5 Due to its low alkalinity, it does not affect chrome complex in neutralizing free acidity of leather.Due to its composition, it shows good buffering action y ensures safe neutralization giving uniparam pH throughout entire cross-section of leather.It's use in neutralization of chrome tanned leathers results in lowering of cationic charge of the surface. This facilitates subsequent Teñido y fatliquoring operations It improves the penetration of dyestuffs y does not bleach the colour. The Dosis recomendada is 2-3%, on shaved wt., para shoe upper leathers.The neutralization pH can be adjusted con all other suitable alkalis.The Dosis recomendada is 1 - 2% on pelt wt. para basification. Product is stable for one year from date of fabricar, if stored at ambient temperature in supplied packing.

Productos y Páginas Relacionados

Productos Relacionados

Químicos para Cuero
Beam House
Sintanes líquidos
Fatliquors
Fijadores de tinte

Preguntas Frecuentes

Encuentre respuestas a preguntas comunes sobre nuestros productos y servicios

Los sintanes son agentes curtientes sintéticos utilizados en el procesamiento del cuero para mejorar el llenado, la suavidad y la receptividad al tinte. Mejoran la calidad del cuero y las características del grano.

Venus Ethoxyethers suministra sintanes líquidos y en polvo para curtido de cuero en India. Ofrecemos soluciones de curtido y llenado. Solicite una cotización.

Los sintanes líquidos son soluciones listas para usar que ofrecen comodidad y fácil aplicación. Los sintanes en polvo requieren disolución pero ofrecen mayor vida útil y pueden personalizarse para aplicaciones específicas. Ambos proporcionan excelentes propiedades de curtido y llenado.

Los sintanes mejoran el llenado, la suavidad, la compactación del grano, la receptividad al tinte y la calidad general del cuero. Ayudan a producir artículos de cuero de alta calidad con propiedades consistentes y características de rendimiento mejoradas.

Venus Ethoxyethers fabrica y suministra productos químicos para cuero en India: sintanes (líquidos y en polvo), fatliquors, fijadores de tinte, productos para beam house y acabado. Solicite una cotización.

El procesamiento del cuero utiliza productos químicos para beam house, sintanes, fatliquors, fijadores de tinte y acabado. Venus suministra una gama completa desde el curtido en bruto hasta el cuero acabado.

Los sintanes son agentes curtientes sintéticos que mejoran la plenitud, suavidad y receptividad al tinte del cuero. Ofrecemos sintanes líquidos y en polvo que mejoran la calidad y las propiedades del cuero acabado.

Los fatliquors aportan suavidad, flexibilidad y durabilidad al cuero. Lubrican las fibras, previenen la fragilidad y mantienen el cuero flexible y confortable.

Sí, ofrecemos productos químicos para cuero que cumplen estándares internacionales, desarrollados con enfoque en reducir el impacto ambiental manteniendo alto rendimiento.

No se encontraron preguntas

Intente ajustar los términos de búsqueda